Cursor (databases)

Cursor (databases)

In computer science and technology, a database cursor is a control structure that enables traversal over the records in a database. Cursors facilitate subsequent processing in conjunction with the traversal, such as retrieval, addition and removal of database records. The database cursor characteristic of traversal makes cursors akin to the programming language concept of iterator.

Cursors are used by database programmers to process individual rows returned by database system queries. Cursors enable manipulation of whole result sets at once—a capability that most procedural programming languages lack. In this scenario, a cursor enables the rows in a result-set to be processed sequentially.

In SQL procedures, a cursor make it possible to define a result set (a set of data rows) and perform complex logic on a row by row basis. By using the same mechanics, an SQL procedure can also define a result set and return it directly to the caller of the SQL procedure or to a client application.

A cursor can be viewed as a pointer to one row in a set of rows. The cursor can only reference one row at a time, but can move to other rows of the result set as needed. To use cursors in SQL procedures, you need to do the following:

   Declare a cursor that defines a result set.
   Open the cursor to establish the result set.
   Fetch the data into local variables as needed from the cursor, one row at a time.
   Close the cursor when done

To work with cursors you must use the following SQL statements:

   DECLARE CURSOR
   OPEN
   FETCH
   CLOSE

This section introduces the ways the SQL:2003 standard defines how to use cursors in applications in embedded SQL. Not all application bindings for relational database systems adhere to that standard, and some (such as CLI or JDBC) use a different interface.

A programmer makes a cursor known to the DBMS by using a DECLARE ... CURSOR statement and assigning the cursor a (compulsory) name:

 DECLARE cursor_name CURSOR FOR SELECT ... FROM ...

Before code can access the data, it must open the cursor with the OPEN statement. Directly following a successful opening, the cursor is positioned before the first row in the result set.

 OPEN cursor_name

Programs position cursors on a specific row in the result set with the FETCH statement. A fetch operation transfers the data of the row into the application.

 FETCH cursor_name INTO ...

Once an application has processed all available rows or the fetch operation is to be positioned on a non-existing row (compare scrollable cursors below), the DBMS returns a SQLSTATE '02000' (usually accompanied by an SQLCODE +100) to indicate the end of the result set.

The final step involves closing the cursor using the CLOSE statement:

 CLOSE cursor_name

After closing a cursor, a program can open it again, which implies that the DBMS re-evaluates the same query or a different query and builds a new result-set.

Contents

Scrollable cursors

Programmers may declare cursors as scrollable or not scrollable. The scrollability indicates the direction in which a cursor can move.

With a non-scrollable cursor, also known as forward-only, one can FETCH each row at most once, and the cursor automatically moves to the immediately following row. A fetch operation after the last row has been retrieved positions the cursor after the last row and returns SQLSTATE 02000 (SQLCODE +100).

A program may position a scrollable cursor anywhere in the result set using the FETCH SQL statement. The keyword SCROLL must be specified when declaring the cursor. The default is NO SCROLL, although different language bindings like JDBC may apply different default.

 DECLARE cursor_name sensitivity SCROLL CURSOR FOR SELECT ... FROM ...

The target position for a scrollable cursor can be specified relative to the current cursor position or absolute from the beginning of the result set.

 FETCH [ NEXT | PRIOR | FIRST | LAST ] FROM cursor_name
 FETCH ABSOLUTE n FROM cursor_name
 FETCH RELATIVE n FROM cursor_name

Scrollable cursors can potentially access the same row in the result set multiple times. Thus, data modifications (insert, update, delete operations) from other transactions could have an impact on the result set. A cursor can be SENSITIVE or INSENSITIVE to such data modifications. A sensitive cursor picks up data modifications impacting the result set of the cursor, and an insensitive cursor does not. Additionally, a cursor may be ASENSITIVE, in which case the DBMS tries to apply sensitivity as much as possible.

"WITH HOLD"

Cursors are usually closed automatically at the end of a transaction, i.e. when a COMMIT or ROLLBACK (or an implicit termination of the transaction) occurs. That behavior can be changed if the cursor is declared using the WITH HOLD clause. (The default is WITHOUT HOLD.) A holdable cursor is kept open over COMMIT and closed upon ROLLBACK. (Some DBMS deviate from this standard behavior and also keep holdable cursors open over ROLLBACK.)

 DECLARE cursor_name CURSOR WITH HOLD FOR SELECT ... FROM ...

When a COMMIT occurs, a holdable cursor is positioned before the next row. Thus, a positioned UPDATE or positioned DELETE statement will only succeed after a FETCH operation occurred first in the transaction.

Note that JDBC defines cursors as holdable per default. This is done because JDBC also activates auto-commit per default. Due to the usual overhead associated with auto-commit and holdable cursors, both features should be explicitly deactivated at the connection level.

Positioned update/delete statements

Cursors can not only be used to fetch data from the DBMS into an application but also to identify a row in a table to be updated or deleted. The SQL:2003 standard defines positioned update and positioned delete SQL statements for that purpose. Such statements do not use a regular WHERE clause with predicates. Instead, a cursor identifies the row. The cursor must be opened and already positioned on a row by means of FETCH statement.

 UPDATE table_name
 SET    ...
 WHERE  CURRENT OF cursor_name
 DELETE
 FROM   table_name
 WHERE  CURRENT OF cursor_name

The cursor must operate on an updatable result set in order to successfully execute a positioned update or delete statement. Otherwise, the DBMS would not know how to apply the data changes to the underlying tables referred to in the cursor.

Cursors in distributed transactions

Using cursors in distributed transactions (X/Open XA Environments), which are controlled using a transaction monitor, is no different than cursors in non-distributed transactions.

One has to pay attention when using holdable cursors, however. Connections can be used by different applications. Thus, once a transaction has been ended and committed, a subsequent transaction (running in a different application) could inherit existing holdable cursors. Therefore, an application developer has to be aware of that situation.

Cursors in XQuery

The XQuery language allows cursors to be created using the subsequence() function.

The format is:

let $displayed-sequence := subsequence($result, $start, $item-count)

Where $result is the result of the initial XQuery, $start is the item number to start and $item-count is the number of items to return.

Equivalently this can also be done using a predicate:

let $displayed-sequence := $result[$start to $end]

Where $end is the end sequence.

For complete examples see the XQuery Wikibook.

Disadvantages of cursors

The following information may vary depending on the specific database system.

Fetching a row from the cursor may result in a network round trip each time. This uses much more network bandwidth than would ordinarily be needed for the execution of a single SQL statement like DELETE. Repeated network round trips can severely impact the speed of the operation using the cursor. Some DBMSs try to reduce this impact by using block fetch. Block fetch implies that multiple rows are sent together from the server to the client. The client stores a whole block of rows in a local buffer and retrieves the rows from there until that buffer is exhausted.

Cursors allocate resources on the server, for instance locks, packages, processes, temporary storage, etc. For example, Microsoft SQL Server implements cursors by creating a temporary table and populating it with the query's result-set. If a cursor is not properly closed (deallocated), the resources will not be freed until the SQL session (connection) itself is closed. This wasting of resources on the server can not only lead to performance degradations but also to failures.

See also

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Cursor — A cursor is a moving placement or pointer that indicates a position. English speakers have used the term with this meaning since the 16th century, for a wide variety of movable or mobile position markers. The literal meaning of the original Latin …   Wikipedia

  • Cursor (base de datos) — Saltar a navegación, búsqueda En bases de datos, el término cursor se refiere a una estructura de control utilizada para el recorrido (y potencial procesamiento) de los registros del resultado de una consulta. Un cursor se utiliza para el… …   Wikipedia Español

  • Extensible Storage Engine — For JET Red storage engine of Microsoft Access, see Microsoft Jet Database Engine. For the teacher s term, Exceptional education. Extensible Storage Engine (ESE), also known as JET Blue, is an Indexed Sequential Access Method (ISAM) data storage… …   Wikipedia

  • Gadfly (database) — Gadfly is a relational database management system written in Python. Gadfly is a collection of Python modules that provides relational database functionality entirely implemented in Python. It supports a subset of the standard RDBMS Structured… …   Wikipedia

  • Comparison of relational database management systems — Programming language comparisons General comparison Basic syntax Basic instructions Arrays Associative arrays String operations …   Wikipedia

  • SQL — This article is about the database language. For the airport with IATA code SQL, see San Carlos Airport. SQL Paradigm(s) Multi paradigm Appeared in 1974 Designed by Donald D. Chamberlin Raymond F. Boyce Developer …   Wikipedia

  • List of file formats — This is an incomplete list, which may never be able to satisfy particular standards for completeness. You can help by expanding it with reliably sourced entries. See also: List of file formats (alphabetical) This is a list of file formats… …   Wikipedia

  • Java Database Connectivity — (JDBC) is an API for the Java programming language that defines how a client may access a database. It provides methods for querying and updating data in a database. JDBC is oriented towards relational databases. The Java 2 Platform, Standard… …   Wikipedia

  • Database — A database is an organized collection of data for one or more purposes, usually in digital form. The data are typically organized to model relevant aspects of reality (for example, the availability of rooms in hotels), in a way that supports… …   Wikipedia

  • XML database — An XML database is a data persistence software system that allows data to be stored in XML format. This data can then be queried, exported and serialized into the desired format. Two major classes of XML database exist: XML enabled: these map all …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”