Carbonate platform

Carbonate platform

A carbonate platform is a sedimentary body which possesses topographic relief, and is composed of autochthonous calcareous deposits (Wilson, 1975). Platform growth is mediated by sessile organisms whose skeletons build up the reef or by organisms (usually microbes) which induce carbonate precipitation through their metabolism. Therefore, carbonate platforms can not grow up everywhere: they are not present in places where limiting factors to the life of reef-building organisms exist. Such limiting factors are, among others: light, water temperature and transparency. For example, carbonate sedimentation along the Atlantic South American coasts takes place everywhere but at the mouth of the Amazon River, because of the intense turbidity of the water there (Carannante et al., 1988). Spectacular examples of present-day carbonate platforms are the Bahama Banks (which are roughly 8 kilometers thick), the Yucatan Peninsula, the Great Barrier Reef and the Maldive atolls. [http://www.tamug.edu/cavebiology/Bahamas/BahamaIntro.html] Even the Florida Peninsula is a carbonate platform, albeit one no longer submerged. [ [http://geology.about.com/library/bl/maps/blfloridamap.htm?terms=geologic+map+of+Florida Geologic Map of Florida ] ] All these reefs are confined to tropical latitudes. [http://reefgis.reefbase.org/mapper.asp] Today’s reefs are built mainly by scleractinian corals, but in the distant past other organisms, like archaeocyatha (during the Cambrian) or extinct cnidaria, (tabulata and rugosa) were important reef builders.

Carbonate sedimentation

The mineralogic composition of carbonate platforms may be either calcitic or aragonitic. Seawater is oversaturated in carbonate, so under certain conditions CaCO3 precipitation is possible. Carbonate precipitation is thermodynamically favoured at high temperature and low pressure. Three types of carbonate precipitation are possible: "biotically controlled", "biotically induced" and "abiotic". Carbonate precipitation is biotically controlled when organisms (such as corals) are present that exploit carbonate dissolved in seawater to build their calcitic or aragonitic skeletons. Thus they may develop hard reef structures. Biotically induced precipitation takes place outside the cell of the organism, thus carbonate is not directly produced by organisms, but precipitates because of their metabolism. Abiotic precipitation involves little or no biological influence.

Classification

The three types of precipitation described above determine different platform geometries. According to these characteristics a classification was created, consisting of three types of carbonate factories. A carbonate factory is the ensemble of the sedimentary environment, the intervening organisms and the precipitation processes that lead to the formation of a carbonate platform (Schlager, 2005).

Tropical factory

In these platforms precipitation is biotically controlled, mostly by autotrophic organisms. Organisms that build this kind of platform are mostly corals, green algae, foraminifers and molluscs. These platforms are found only in warm (more than 20°C) and sunlit waters, high in oxygen and low in nutrients. This means that they are found between 30° north and 30° south of the equator. This type of factory is the most widespread today, and is often found fossilised.

Cool-water factory

As the name suggests, this type of platform extends its domain to cooler waters and higher latitudes than tropical factories. Precipitation is biotically controlled by heterotrophic organisms, sometimes in association with photo-autotrophic organisms such as red algae. The sea-waters of these platforms are characterised by a higher amount of nutrients than in tropical factories.

Mud-mound factory

These platforms are characterised by abiotic precipitation and biotically induced precipitation. They grow in waters high in nutrients and low in oxygen. Mud-mound factories are known only from the fossil record, especially Paleozoic and Mesozoic.

Geometry of carbonate platforms

Several factors influence the geometry of a carbonate platform, including inherited topography, synsedimentary tectonics, exposition to currents and trade winds. However, the one most important factor is perhaps the type of carbonate factory. Thus, cool-water factories tend to generate ramps, tropical factories usually form high-relief rimmed platforms and mud-mounds, mound-shaped high relief bodies without a clear zone of dip break. The best known platform geometry, however, is that of modern tropical factories. Tropical carbonate platforms can be subdivided into three principal sedimentary environments: reef, internal lagoon and slope.

Reef

The reef is that part of a carbonate platform created by essentially in-place, sessile organisms. Today’s reefs are built by hermatypic organisms. The reef is the rigid structure of carbonate platforms and is located between the internal lagoon and the slope. Survival of the platform depends on the existence of the reef, because only this part of the platform can build a rigid, wave-resistant structure. Two reef types are distinguished: isolated (as Maldives atolls) or epicontinental (as the Belize reefs or the Florida Keys). Geologically speaking, reef rocks can be classified as massive boundstones.

Internal Lagoon

The internal lagoon, as the name suggests, is the part of platform behind the reef. It is characterised by shallow and calm waters. Sediments are composed of reef fragments and hard parts of organisms. If the reef is epicontinental there can be also a terrigenous contribution. In some lagoons (e.g., the Florida Bay) green algae produce great volumes of carbonate mud. Rocks here are mudstones to grainstones depending on the energy of the environment.

lope

The slope is the outer part of the platform, connecting the reef with the basin. This area acts as sink for excess carbonate sediment: most of the sediment produced in the lagoon and reef is transported by various processes and accumulates in the slope. Therefore, the slope contains coarser sediments than the reef and lagoon; these rocks are generally rudstones or grainstones. Sediments have a characteristic geometry: they are organised in clinoforms. Clinoforms are beds that have a sigmoidal or tabular shape, but are always deposited with a primary inclination.

Carbonate platforms in the geological record

[


350_px|thumb|right|_The_Cimon_del_Latemar_(Trento_province,_Dolomites,_northern_Italy)_rappresents_the_internal_lagoon_of_a_fossil_carbonate_platform.Continuous_sedimentation_took_place_in_an_environment_as_the_one_described_in_the_image_of_the_Florida_Bay_and,_given_a_strong_subsidence, led to the formation of a sedimentary series that therefore acquired considerable thickness.] Sedimentary sequences show carbonate platforms as old as the Precambrian, when they were formed by stromatolitic sequences. In the Cambrian carbonate platforms were built by archaeocyatha, metazoa similar to porifera. During Paleozoic brachiopod (richtofenida) and stromatoporoidea reefs were erected. At the middle of the Paleozoic era corals became important platforms builders, first with tabulata (from the Silurian) and then with rugosa (from the Devonian). Scleractinia become important reef builders beginning only in the Carnian (upper Triassic). One of the best examples of a carbonate platform is the Dolomites, deposited during the Triassic. This region of the Southern Alps contains many well preserved “atolls”, including the Sella, Gardenaccia, Sassolungo and Latemar, the latter being a backstepping type platform. In the Cretaceous period there were platforms built by bivalvia (rudists).

ee also

*Bahama Banks

Footnotes:

References:

*Carannante G., Esteban M., Milliman J. D., Simone L., 1988, Carbonate lithofacies as paleolatitude indicators: problems and limitations. [http://www.elsevier.com/wps/find/journaldescription.cws_home/503361/description#description Sedimentary Geology] , v. 60, pp. 333-346.
*Schlager W., 2005, Carbonate sedimentology and sequence stratigraphy. SEPM, Tulsa, Oklahoma, 200 pp. ISBN 1-56576-116-2
*Wilson J. L., 1975, Carbonate Facies in Geologic History, Springer-Verlag, 471 pp. ISBN 3-540-07236-5
*Bosellini A., 1984, Progradation geometries of carbonate platforms: examples from the Triassic of the Dolomites, northern Italy. “Sedimentology”, v.31:1-24
* [http://www.tamug.edu/cavebiology/Bahamas/BahamaIntro.html "Bahamas Introduction" (Accessed 3/8/06)]
* [http://geology.about.com/library/bl/maps/blfloridamap.htm?terms=geologic+map+of+Florida About.com: Geologic Map of Florida (Accessed 3/8/06)]
*Pinet P. R., 1996, Invitation to Oceanography. St. Paul: West Publishing Company, ISBN 0-314-06339-0


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Carbonate platform — Die Karbonatplattform der Bahama Banks im Satellitenbild. MODIS, NASA Das Große Barriereriff im Satellitenbild Eine …   Deutsch Wikipedia

  • Apulia Carbonate Platform — The Apulia Carbonate Platform in Apulia, Italy was a major palaeogeographic element of the southern margin of the Mesozoic Tethys Ocean. It is one of the so called peri Adriatic platforms, which are comparable to the Bahama Banks in their… …   Wikipedia

  • Platform (geology) — Geologic provinces of the world (USGS)   Shield …   Wikipedia

  • Carbonate hosted lead zinc ore deposits — World wide distribution of MVT deposits, (red), clastic sediment hosted (green), and unclassified (blue) lead zinc deposits. Source: USGS Carbonate hosted lead zinc ore deposits are important and highly valuable concentrations of lead and zinc… …   Wikipedia

  • Ocala Platform — Stratigraphic range: Miocene Type Geological formation Lithology Primary Carbonate Location Named for …   Wikipedia

  • solution platform —    A broad, nearly horizontal intertidal surface (modern or relict) formed across carbonate rocks, produced primarily by solution with contributions by intertidal weathering and biological erosion and deposition, not by abrasion.    Compare: wave …   Glossary of landform and geologic terms

  • Silurian Period — Interval of geologic time, 443–417 million years ago. The third period of the Paleozoic Era, the Silurian follows the Ordovician Period and precedes the Devonian. It marks the first appearance of land plants and jawed fishes. The continents were… …   Universalium

  • Cambrian Period — Oldest time division of the Paleozoic Era. During the Cambrian, 543–490 million years ago, there were widespread seas and several scattered landmasses. The largest continent was Gondwana. The average climate was probably warmer than today, with… …   Universalium

  • Bend Arch-Fort Worth Basin — Infobox Oil field name = Bend Arch Fort Worth Basin Province region = North Central Texas country = United States coordinates = locblock = offonshore = Onshore operators = Devon Energy, Chesapeake Energy, EOG Resources, XTO Energy, EnCana, Range …   Wikipedia

  • Geology of the Death Valley area — The exposed geology of the Death Valley area presents a diverse and complex story that includes at least 23 formations of sedimentary units, two major gaps in the geologic record called unconformities, and at least one distinct set of related… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”