Magnesium diboride

Magnesium diboride
Magnesium diboride
Identifiers
CAS number 12007-25-9 YesY
Properties
Molecular formula MgB2
Molar mass 45.93 g/mol
Density 2.57 g/cm3
Melting point

830 °C (decomp)

Structure
Crystal structure Hexagonal, hP3
Space group P6/mmm, No. 191
 YesY diboride (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Magnesium diboride (MgB2) is a simple ionic binary compound that has proven to be an inexpensive and useful superconducting material.

Its superconductivity was announced in the journal Nature in March 2001.[1] Its critical temperature (Tc) of 39 K (−234 °C; −389 °F) is the highest amongst conventional superconductors. This material was first synthesized and its structure confirmed in 1953,[2] but its superconducting properties were not discovered until 2001. The discovery caused great excitement.[3]

Though generally believed to be a conventional (phonon-mediated) superconductor, it is a rather unusual one. Its electronic structure is such that there exist two types of electrons at the Fermi level with widely differing behaviours, one of them (sigma-bonding) being much more strongly superconducting than the other (pi-bonding). This is at odds with usual theories of phonon-mediated superconductivity which assume that all electrons behave in the same manner. Theoretical understanding of the properties of MgB2 has almost been achieved with two energy gaps. In 2001 it was regarded as behaving more like a metallic than a cuprate superconductor.[4]

Contents

Synthesis

Magnesium diboride can be synthesized by several routes. The simplest is by high temperature reaction between boron and magnesium powders.[4] Formation begins at 650 °C; however, since magnesium metal melts at 652 °C, the reaction mechanism is considered to be moderated by magnesium vapor diffusion across boron grain boundaries. At conventional reaction temperatures, sintering is minimal, although enough grain recrystallization occurs to permit Josephson quantum tunnelling between grains.

Superconducting magnesium diboride wire can be produced through the powder-in-tube (PIT) process. In the in situ variant, a mixture of boron and magnesium is poured into a metal tube, which is reduced in diameter by conventional wire drawing. The wire is then heated to the reaction temperature to form MgB2 inside. In the ex situ variant, the tube is filled with MgB2 powder, reduced in diameter, and sintered at 800 to 1000 °C. In both cases, later hot isostatic pressing at approximately 950 °C further improves the properties.

Hybrid physical-chemical vapor deposition (HPCVD) has been the most effective technique for depositing magnesium diboride (MgB2) thin films.[5] The surfaces of MgB2 films deposited by other technologies are usually rough and non-stoichiometric. In contrast, the HPCVD system can grow high-quality in situ pure MgB2 films with smooth surfaces, which are required to make reproducible uniform Josephson junctions, the fundamental element of superconducting circuits.

Electromagnetic properties

Properties depend greatly on composition and fabrication process. Many properties are anisotropic due to the layered structure. 'Dirty' samples, e.g., with oxides at the crystal boundaries, are different from 'clean' samples.[6]

  • The highest superconducting transition temperature Tc is 39 K.
  • MgB2 is a type-II superconductor, i.e. increasing magnetic fields gradually penetrates into it.
  • Maximum critical current (Jc) is: 105 A/m2 at 20 T, 106 A/m2 at 18 T, 107 A/m2 at 15 T, 108 A/m2 at 10 T, 109 A/m2 at 5 T.[6]
  • As of 2008 : Upper critical field (Hc2): (parallel to ab planes) is ~14.8 T, (perpendicular to ab planes) ~3.3 T, in thin films up to 74 T, in fibers up to 55 T.[6]

Semi-Meissner state

Using the BCS theory and the known energy gaps of the pi and sigma bands of electrons, which are 2.2 and 7.1 meV, the pi and sigma bands of electrons have been found to have two different coherence lengths, 51 nm and 13 nm.[7] The corresponding London penetration depths are 33.6 nm and 47.8 nm. This implies that the Ginzburg-Landau constants are 0.66±0.02 and 3.68 respectively. The first is less than 1/√2 and the second is greater, therefore the first seems to indicate marginal type I superconductivity and the second type II superconductivity.

It has been predicted that when two different bands of electrons yield two quasiparticles, one of which has a coherence length that would indicate type I superconductivity and one of which would indicate type II, then in certain cases, vortices attract at short distances and repel at long distances.[8] In particular, the potential energy between vortices is minimized at a critical distance. As a consequence there is a conjectured new phase called the semi-Meissner state, in which vortices are separated by the critical distance. When the applied flux is too small for the entire superconductor to be filled with a lattice of vortices separated by the critical distance, then there are large regions of type I superconductivity, a Meissner state, separating these domains.

Experimental confirmation for this conjecture has arrived recently in MgB2 experiments at 4.2 kelvin. The authors found that there are indeed regimes with a much greater density of vortices. Whereas the typical variation in the spacing between Abrikosov vortices in a type II superconductor is of order 1%, they found a variation of order 50%, in line with the idea that vortices assemble into domains where they may be separated by the critical distance. The term type-1.5 superconductivity was coined for this state.[7]

Improvement by doping

Various means of doping MgB2 with carbon (e.g. using 10% malic acid) can improve the upper critical field and the maximum current density[9][10] (also with polyvinyl acetate[11]).

5% doping with carbon can raise Hc2 from 16 T to 36 T whilst lowering Tc only from 39 K to 34 K. The maximum critical current (Jc) is reduced, but doping with TiB2 can reduce the decrease.[12] (Doping MgB2 with Ti is patented.[13])

The maximum critical current (Jc) in magnetic field is enhanced greatly by doping with ZrB2.[14]

Even small amounts of doping lead both bands into the type II regime and so no semi-Meissner state may be expected.

Thermal conductivity

MgB2 is a multi-band superconductor, that is each Fermi surface has different superconducting energy gap. For MgB2, sigma bond of boron is strong, and it induces large s-wave superconducting gap, and pi bond is weak and induces small s-wave gap.[15] The quasiparticle states of the vortices of large gap are highly confined to the vortex core. On the other hand, the quasiparticle states of small gap are loosely bound to the vortex core. Thus they can be delocalized and overlap easily between adjacent vortices.[16] Such delocalization can strongly contribute to the thermal conductivity, which shows abrupt increase above Hc1.[15]

Possible applications

Superconducting properties and cheapness make magnesium diboride attractive for a variety of applications.[17] For those applications, MgB2 powder is compressed with silver metal into tape via the PIT process.

In 2006 a 0.5 tesla open MRI superconducting magnet system was built using 18 km of MgB2 wires. This MRI used a closed-loop cryocooler, without requiring externally supplied cryogenic liquids for cooling.[18][19]

"...the next generation MRI instruments must be made of MgB2 coils instead of NbTi coils, operating in the 20–25 K range without liquid helium for cooling. ... Besides the magnet applications MgB2 conductors have potential uses in superconducting transformers, rotors and transmission cables at temperatures of around 25 K, at fields of 1 T."[17]

Thin coatings can be used in superconducting radio frequency cavities to minimize energy loss and reduce the inefficiency of liquid helium cooled niobium cavities.

Because of the low cost of its constituent elements, MgB2 has promise for use in superconducting low to medium field magnets, electric motors and generators, fault current limiters and current leads.[citation needed]

References

  1. ^ Jun Nagamatsu, Norimasa Nakagawa, Takahiro Muranaka, Yuji Zenitani and Jun Akimitsu (1 March 2001). "Superconductivity at 39 K in magnesium diboride". Nature 410 (6824): 63. Bibcode 2001Natur.410...63N. doi:10.1038/35065039. PMID 11242039. http://rtn.elektronika.lt/mi/0102/nature410063.pdf. 
  2. ^ Morton E. Jones and Richard E. Marsh (1954). "The Preparation and Structure of Magnesium Boride, MgB2". Journal of the American Chemical Society 76 (5): 1434. doi:10.1021/ja01634a089. 
  3. ^ 3135 citations in the Scopus database
  4. ^ a b Larbalestier, D. C.; Cooley, L. D.; Rikel, M. O.; Polyanskii, A. A.; Jiang, J.; Patnaik, S.; Cai, X. Y.; Feldmann, D. M. et al. (2001). "Strongly linked current flow in polycrystalline forms of the superconductor MgB2.". Nature 410 (6825): 186–189. arXiv:cond-mat/0102216. Bibcode 2001Natur.410..186L. doi:10.1038/35065559. PMID 11242073. 
  5. ^ X.X. Xi et al. (14 February 2007). "MgB2 thin films by hybrid physical-chemical vapor deposition". Physica C 456: 22–37. Bibcode 2007PhyC..456...22X. doi:10.1016/j.physc.2007.01.029. 
  6. ^ a b c Eisterer, M (2007). "Magnetic properties and critical currents of MgB2". Superconductor Science and Technology 20 (12): R47. Bibcode 2007SuScT..20R..47E. doi:10.1088/0953-2048/20/12/R01. 
  7. ^ a b V. V. Moshchalkov, M. Menghini, T. Nishio, Q.H. Chen, A.V. Silhanek, V.H. Dao, L.F. Chibotaru, N. D. Zhigadlo, J. Karpinsky (2009). "Type-1.5 Superconductors". Physical Review Letters 102 (11): 117001. Bibcode 2009PhRvL.102k7001M. doi:10.1103/PhysRevLett.102.117001. PMID 19392228. 
  8. ^ Egor Babaev and Martin Speight, "Semi-Meissner state and neither type-I nor type-II superconductivity in multicomponent systems"
  9. ^ M S A Hossain et al. (2007). "Significant enhancement of Hc2 and Hirr in MgB2+C4H6O5 bulks at a low sintering temperature of 600 °C". Superconductor Science and Technology 20 (8): L51. Bibcode 2007SuScT..20L..51H. doi:10.1088/0953-2048/20/8/L03. 
  10. ^ Yamada, H; Uchiyama, N; Matsumoto, A; Kitaguchi, H; Kumakura, H (2007). "The excellent superconducting properties of in situ powder-in-tube processed MgB2 tapes with both ethyltoluene and SiC powder added". Superconductor Science and Technology 20 (6): L30. Bibcode 2007SuScT..20L..30Y. doi:10.1088/0953-2048/20/6/L02. 
  11. ^ Vajpayee, A; Awana, V; Balamurugan, S; Takayamamuromachi, E; Kishan, H; Bhalla, G (2007). "Effect of PVA doping on flux pinning in Bulk MgB2". Physica C: Superconductivity 466: 46–50. arXiv:0708.3885. Bibcode 2007PhyC..466...46V. doi:10.1016/j.physc.2007.05.046. 
  12. ^ "MgB2 Properties Enhanced by Doping with Carbon Atoms". http://www.azom.com/details.asp?articleID=2542. 
  13. ^ Yong Zhao et al "MgB2—based superconductor with high critical current density, and method for manufacturing the same" U.S. Patent 6,953,770, Issue date: Oct 11, 2005
  14. ^ Ma, Y. (2006). "Doping effects of ZrC and ZrB2 in the powder-in-tube processed MgB2 tapes". Chinese Science Bulletin 51 (21): 2669–2672. doi:10.1007/s11434-006-2155-4. http://scholar.ilib.cn/Abstract.aspx?A=kxtb-e200621018. 
  15. ^ a b Sologubenko, A. V.; Jun, J.; Kazakov, S. M.; Karpinski, J.; Ott, H. R. (2002). "Thermal conductivity of single crystalline MgB2". Physical Review B 66. arXiv:cond-mat/0201517. Bibcode 2002PhRvB..66a4504S. doi:10.1103/PhysRevB.66.014504. http://www.citebase.org/fulltext?format=application%2Fpdf&identifier=oai%3AarXiv.org%3Acond-mat%2F0201517. 
  16. ^ Nakai, Noriyuki; Ichioka, Masanori; MacHida, Kazushige (2002). "Field Dependence of Electronic Specific Heat in Two-Band Superconductors". Journal of the Physical Society of Japan 71: 23. arXiv:cond-mat/0111088. Bibcode 2002JPSJ...71...23N. doi:10.1143/JPSJ.71.23. 
  17. ^ a b Vinod, K; Kumar, R G Abhilash; Syamaprasad, U (2007). "Prospects for MgB2 superconductors for magnet application". Superconductor Science and Technology 20: R1–R13. doi:10.1088/0953-2048/20/1/R01. 
  18. ^ "First MRI system based on the new Magnesium Diboride superconductor" (PDF). Columbus Superconductors. http://www.columbussuperconductors.com/Press%20release.pdf. Retrieved 2008-09-22. 
  19. ^ Braccini, Valeria; Nardelli, Davide; Penco, Roberto; Grasso Giovanni (2007). "Development of ex situ processed MgB2 wires and their applications to magnets". Physica C: Superconductivity 456 (1–2): 209–217. Bibcode 2007PhyC..456..209B. doi:10.1016/j.physc.2007.01.030. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Diboride — may refer to: Aluminium diboride, a compound of aluminium and boron Hafnium diboride, an ultra high temperature ceramic composed of Hafnium and Boron Magnesium diboride, an inexpensive and simple superconductor Rhenium diboride, a synthetic… …   Wikipedia

  • Rhenium diboride — Chembox new ImageFile = Rhenium Diboride.jpg IUPACName = Rhenium Diboride OtherNames = Section1 = Chembox Identifiers CASNo = 12355 99 6 PubChem = SMILES = Section2 = Chembox Properties Formula = ReB2 MolarMass = 207.83 g/mol Appearance = Density …   Wikipedia

  • Low valent magnesium compounds — Two low valent magnesium compounds have been discovered that are the first examples of stable magnesium(I) compounds.cite journal last= Green first= S. P. authorlink= coauthors= Jones C.; Stasch A. year= 2007 month= December title= Stable… …   Wikipedia

  • Aluminium diboride — Chembox new ImageFile = ImageSize = IUPACName = aluminium diboride OtherNames = aluminium boride aluminum diboride Section1 = Chembox Identifiers CASNo = 12041 50 8 PubChem = SMILES = Section2 = Chembox Properties Formula = AlB2 MolarMass = 48.60 …   Wikipedia

  • Boron — (pronEng|ˈbɔərɒn) is a chemical element with atomic number 5 and the chemical symbol B. Boron is a trivalent nonmetallic element which occurs abundantly in the evaporite ores borax and ulexite. Boron is never found as a free element on… …   Wikipedia

  • Hybrid Physical-Chemical Vapor Deposition — (HPCVD) is a thin film deposition technique that combines physical vapor deposition (PVD) with chemical vapor deposition (CVD). For the instance of magnesium diboride (MgB2) thin film growth, HPCVD process uses diborane (B2H6) as the boron… …   Wikipedia

  • Technological applications of superconductivity — Some of the technological applications of superconductivity include: the production of sensitive magnetometers based on SQUIDs fast digital circuits (including those based on Josephson junctions and rapid single flux quantum technology), powerful …   Wikipedia

  • Superconductivity — is a phenomenon occurring in certain materials generally at very low temperatures, characterized by exactly zero electrical resistance and the exclusion of the interior magnetic field (the Meissner effect).The electrical resistivity of a metallic …   Wikipedia

  • Fault current limiter — A Fault Current Limiter (FCL) is a device which limits the prospective fault current when a fault occurs (eg in a power transmission network). The term is generally applied to superconducting devices, whereas non superconducting devices (such as… …   Wikipedia

  • Superconductor classification — Superconductors can be classified in accordance with several criteria that depend on our interest in their physical properties, on the understanding we have about them, on how expensive is cooling them or on the material they are made of. By… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”