Wattle and daub

Wattle and daub
HeiligenstadtFachwerk.JPG

Wattle and daub (or wattle-and-daub) is a building material used for making walls, in which a woven lattice of wooden strips called wattle is daubed with a sticky material usually made of some combination of wet soil, clay, sand, animal dung and straw. Wattle and daub has been used for at least 6,000 years, and is still an important construction material in many parts of the world. Many historic buildings include wattle and daub construction, and the technique is becoming popular again in more developed areas as a low-impact sustainable building technique.

Contents

Construction

Wattle in the process of being made.

The wattle is made by weaving thin branches (either whole, or more usually split) or slats between upright stakes. The wattle may be made as loose panels, slotted between timber framing to make infill panels, or it may be made in place to form the whole of a wall.

Daub is generally created from a mixture of certain ingredients from three categories: binders, aggregates and reinforcement. Binders hold the mix together and can include clay, lime, chalk dust and limestone dust. Aggregates give the mix its bulk and dimensional stability through materials such as earth, sand, crushed chalk and crushed stone. Reinforcement is provided by straw, hair, hay or other fibrous materials, and helps to hold the mix together as well as to control shrinkage and provide flexibility.[1] The daub may be mixed by hand, or by treading – either by humans or livestock. It is then applied to the wattle and allowed to dry, and often then whitewashed to increase its resistance to rain.

This process is similar in modern architecture to lath and plaster, a common building material for wall and ceiling surfaces, in which a series of nailed wooden strips are covered with plaster smoothed into a flat surface. In some regions this building method has itself been overtaken by drywall construction using plasterboard sheets.

History

A wattle and daub house used by American Indians during the Mississippian period.

The wattle and daub technique was used already in the Neolithic. It was common for houses of the Linearbandkeramic and Rössen cultures of Central Europe, but is also found in Western Asia (Çatalhöyük, Shillourokambos) as well as in North America (Mississippian Culture) and South America (Brazil). Its usage dates back at least 6000 years. There are suggestions that construction techniques such as lath and plaster and even cob may have evolved from the practicality of wattle and daub. Fragments from prehistoric wattle and daub buildings have been found in Africa, Europe, Mesoamerica and North America.[2] A review of English architecture especially reveals that the sophistication of this craft is dependent on the various styles of timber frame housing.

A woven wattle gate keeps animals out of the fifteenth-century cabbage patch (Tacuinum Sanitatis, Rouen)

Styles of panels

As discussed earlier there were two popular choices for wattle and daub paneling: square paneling and close-studded paneling.

Close-studding

Close-studding panels create a much more narrow space between the timbers; anywhere from seven to sixteen inches. For this style of panel weaving becomes too difficult so the wattles run horizontally and are known as ledgers. The ledgers are sprung into each upright timber (stud) through a system of augured holes on one side and short chiseled groves along the other. The holes (along with holes of square paneling) are drilled at a slight angle towards the outer face of each stud. This allows room for upright hazels to be tied to ledgers from the inside of the building. The horizontal ledgers are placed every two to three feet with whole hazel rods positioned upright top to bottom and lashed to the ledgers. These hazel rods are generally tied a finger widths apart with 6-8 rods to each 16 inch width. Gaps allow key formation for drying.[3]

Square panels

Wattle panel.

Square panels are large, wide panels typical of some later timber frame houses. They have a square shape although sometimes they are triangular to accommodate arched or decorative bracing. This style does require wattles to be woven for better support of the daub.

To insert wattles in a square panel several steps are required. First, a series of evenly spaced holes are drilled along the middle of the inner face of each upper timber. Next, a continuous groove is cut along the middle of each inner face of the lower timber in each panel. Vertical slender timbers, known as staves, are then inserted and these hold the whole panel within the timber frame. The staves are positioned into the holes and then sprung into the grooves. They must be placed with sufficient gaps to weave the flexible horizontal wattles (Sunshine, 2006).

Acacias

The origin of the term 'wattle' as a term describing a group of acacias in Australia, is from the term "wattling". In early Australian European settlement the acacias were commonly used in wattling, and the name became shortened to wattle.

Pug and pine (or pine and pug)

In the early days of South Australia, in areas where substantial timber was unavailable, pioneers' cottages and other small buildings were frequently constructed with light vertical timbers, which may have been "native pine" (Callitris or Casuarina spp.), driven into the ground, the gaps being stopped with "pug" (kneaded clay and grass mixture). Another term for this construction is "palisade and pug".[4]

See also

References

  1. ^ Pritchett, Ian. The Building Conservation Directory, 2001: "Wattle and Daub". Accessed 2 February 2007
  2. ^ Shaffer, G.D. "An Archaeomagnetic Study of a Wattle and Daub Building Collapse." Journal of Field Archaeology, 20, No. 1. Spring, 1993. 59-75. JSTOR. Accessed 28 January 2007
  3. ^ Sunshine, Paula. Wattle and Daub. Buckinghamshire: Shire Publications Ltd 2006.
  4. ^ http://mileslewis.net/australian-building/pdf/04-hybrid-types/hybrid-types-palisade-pug.pdf

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • wattle and daub — ► NOUN ▪ a material formerly used in building walls, consisting of wattle covered with mud or clay …   English terms dictionary

  • wattle and daub — 1. Also, wattle and dab. a building technique employing wattles plastered with clay and mud. 2. a form of wall construction consisting of upright posts or stakes interwoven with twigs or tree branches and plastered with a mixture of clay and… …   Universalium

  • wattle and daub — noun Date: circa 1808 a framework of woven rods and twigs covered and plastered with clay and used in building construction • wattle and daub adjective …   New Collegiate Dictionary

  • wattle-and-daub — adjective see wattle and daub …   New Collegiate Dictionary

  • Wattle, Wattle and Daub — A mat (wattle) of woven sticks and twigs used in walls and fences. When plastered with mud (daub), forming wattle and daub, often used in the walls of dwellings. Recent repairs to a modest 17th century farm labourer s house near here uncovered… …   Medieval glossary

  • wattle and daub — wat′tle and daub′ (or dab′) n. bui a building technique employing wattles plastered with clay and mud • Etymology: 1800–10 …   From formal English to slang

  • Wattle and Daub — 1) A combination of laths and clay used to infill panels in a timber framed building. (Kenyon, John R. Medieval Fortifications, 212) 2) Hurdlework of vertical stakes, interwoven with mixture of clay strengthened with straw, cow hair, etc., and… …   Medieval glossary

  • wattle and daub — building material that consists of wattle covered with mud or clay (sometimes contains lime, dung, straw) …   English contemporary dictionary

  • wattle and daub — noun a material formerly used in building walls, consisting of wattle covered with mud or clay …   English new terms dictionary

  • wattle and daub — a substance used in the past for building walls, consisting of wattle covered with clay …   English dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”