- Lateral earth pressure
Lateral earth pressure is the
pressure thatsoil exerts in thehorizontal plane . The common applications of lateral earth pressure theory are for the design of groundengineering structures such asretaining wall s,basement s,tunnel s, and to determine thefriction on the sides ofdeep foundation s.To describe the pressure a soil will exert, a lateral earth pressure
coefficient , K, is used. K is the ratio of lateral (horizontal) pressure to vertical pressure (K = σh'/σv'). Thus horizontal earth pressure is assumed to be directly proportional to the vertical pressure at any given point in the soil profile. K can depend on the soil properties and the stress history of the soil. Lateral earth pressure coefficients are broken up into three categories: at-rest, active, and passive.The pressure coefficient used in
geotechnical engineering analyses depends on the characteristics of its application. There are many theories for predicting lateral earth pressure; some areempirically based, and some are analytically derived.At rest pressure
At rest lateral earth pressure, represented as K0, is the "
in situ " horizontal pressure. It can be measured directly by a dilatometer test (DMT) or a borehole pressuremeter test (PMT). As these are rather expensive tests, empirical relations have been created in order to predict at rest pressure with less involved soil testing, and relate to the angle of shearing resistance. Two of the more commonly used are presented below.Jaky (1948) [Jaky J. (1948) Pressure in soils, 2nd ICSMFE, London, Vol. 1, pp 103-107.] for normally consolidated soils:
:
Mayne & Kulhawy (1982) [Mayne, P.W. and Kulhawy, F.H. (1982). “K0-OCR relationships in soil”. Journal of GeotechnicalEngineering, Vol. 108 (GT6), 851-872.] for overconsolidated soils:
:
The latter requires the OCR profile with depth to be determined.
To estimate K0 due to compaction pressures, refer Ingold (1979) [Ingold, T.S., (1979) The effects of compaction on retaining walls, Gèotechnique, 29, p265-283.]
Active and passive pressure
The active state occurs when a soil mass is allowed to relax or move outward to the point of reaching the limiting strength of the soil; that is, the soil is at the failure condition in extension. Thus it is the minimum lateral soil pressure that may be exerted. Conversely, the passive state occurs when a soil mass is externally forced to the limiting strength (that is, failure) of the soil in compression. It is the maximum lateral soil pressure that may be exerted. Thus active and passive pressures define the minimum and maximum possible pressures respectively that may be exerted in a horizontal plane.
Rankine theory
Rankine's theory, developed in 1857 [Rankine, W. (1857) On the stability of loose earth. Philosophical Transactions of the Royal Society of London, Vol. 147.] , is a stress field solution that predicts active and passive earth pressure. It assumes that the soil is cohesionless, the wall is frictionless, the soil-wall interface is vertical, the failure surface on which the soil moves is
planar , and the resultant force is angled parallel to the backfill surface. The equations for active and passive lateral earth pressure coefficients are given below. Note that φ' is the angle of shearing resistance of the soil and the backfill is inclined at angle β to the horizontal.:
:
For the case where β is 0, the above equations simplify to
:
:
Coulomb theory
Coulomb (1776) [Coulomb C.A., (1776). Essai sur une application des regles des maximis et minimis a quelques problemes de statique relatifs a l'architecture. Memoires de l'Academie Royale pres Divers Savants, Vol. 7] first studied the problem of lateral earth pressures on retaining structures. He used limit equilibrium theory, which considers the failing soil block as a
free body in order to determine the limiting horizontal earth pressure. The limiting horizontal pressures at failure in extension or compression are used to determine the "K"a and "K"p respectively. Since the problem is indeterminate [Kramer S.L. (1996) Earthquake Geotechnical Engineering, Prentice Hall, New Jersey] , a number of potential failure surfaces must be analysed to identify the critical failure surface (i.e. the surface that produces the maximum or minimum thrust on the wall). Mayniel (1908) [Mayniel K., (1808), Traité expérimental, analytique et preatique de la poussée des terres et des murs de revêtement, Paris.] later extended Coulomb's equations to account for wall friction, symbolized by "δ". Müller-Breslau (1906) [Müller-Breslau H., (1906) Erddruck auf Stutzmauern, Alfred Kroner, Stuttgart. ] further generalized Mayniel's equations for a non-horizontal backfill and a non-vertical soil-wall interface (represented by angle θ from the vertical).:
:
Caquot and Kerisel
In 1948,
Albert Caquot (1881-1976) andJean Kerisel (1908-2005) developed an advanced theory that modified Muller-Breslau's equations to account for a non-planar rupture surface. They used a logarithmic spiral to represent the rupture surface instead. This modification is extremely important for passive earth pressure where there is soil-wall friction. Mayniel and Muller-Breslau's equations are unconservative in this situation and are dangerous to apply. For the active pressure coefficient, the logarithmic spiral rupture surface provides a negligible difference compared to Muller-Breslau. These equations are too complex to use, so tables or computers are used instead..Equivalent fluid pressure
Terzaghi and Peck, in 1948, developed empirical charts for predicting lateral pressures. Only the soil's classification and backfill slope angle are necessary to use the charts. In order for this method to be safe to implement, the values given are conservative. This method was developed with Rankine theory.
Bell's relation
For soils with cohesion, Bell developed an analytical solution that uses the square root of the pressure coefficient to predict the cohesion's contribution to the overall resulting pressure. These equations represent the total lateral earth pressure. The first term represents the non-cohesive contribution and the second term the cohesive contribution. The first equation is for an active situation and the second for passive situations.
: :
See also
*
Mohr-Coulomb theory
*Soil mechanics References
*Harvard reference|Surname=Coduto|Given=Donald|Authorlink=|Year=2001|Title=Foundation Design|Place=|Publisher=Prentice-Hall|ID=ISBN 0-13-589706-8|URL=
* [http://www.dot.ca.gov/hq/esc/construction/manuals/OSCCompleteManuals/TrenchingandShoringManualRev12.pdf California Department of Transportation Material on Lateral Earth Pressure]Notes
Wikimedia Foundation. 2010.